- Concrete Batching Plant
- Selection principles of concrete batching plant已关闭评论
- concrete batching plant
As we all know, almost all the construction project need concrete as construction material, so concrete batching plant for producing concrete is need everywhere. Due to the difference project, there are many types of concrete batching plant to be chosen. Therefore, how to select the right concrete batching plant becomes a technical task for the project managers. For choosing concrete batching plant, there are some principle for pay attention to.
1, The performance label of construction concrete, so as to choose what kind of mixer host. Such as water conservancy project must chose twin shaft forced type concrete mixer. In addition, the concrete batching machine and cement silo should be selected according to the types of concrete materials.
2, The construction tasks and duration period, use of these two parameters to choose the size of theconcrete batching plant. The transportation of finished concrete should also be considered in the selection. For example: direct pumping or vehicle delivery. The volume of the transport vehicle is also an important basis for deciding the type of mixing plant.
3, The construction quantity and construction period, when the site required one-time pouring concrete in large quantities, high quality requirements, and no concrete batching plant nearby, the best choice is two sets small batching plant, or choose a pair of double principal preparation.
4, When the site traffic is inconvenience, the maintenance staff need to spend a lot of time on entering and leaving site, the best choice is two smaller size of concrete plant, or to prepare enough spare parts, so as to ensure the smooth progress of construction.
5, The transport distance, when the construction site is dispersed, but the distance between the site is not too far, concrete mixer truck transport radius is not more than 30 minutes, dump truck delivery is not more than 10 minutes. It is better to adopt multiple concentration agitation to improve the utilization ratio of the mixing plant and the economic benefit of the construction.